Cub Cadet 435A Spécifications télécharger pdf (Page 57)

Steering

Front wheels

Remove/ replace the front wheels:

1. Lift and safely support the front end of the riding

mower.

2. Remove the axle bolt and nut using a pair of 3/4”

wrenches. See Figure 5.9.

3. Slide the tire and wheel assembly out of the yoke.

NOTE: There is a short spacer on each side of the wheel.

The short spacers slide over the long spacer that

the axle bolt passes through. See Figure 5.10.

4. Slide the long spacer out of the wheel bearings.

NOTE: The long spacer is a tight fit to the bearing and may

need to driven out with a hammer and a brass

punch.

5. Install the front wheel by reversing the previous

steps.

Figure 5.9

Axle bolt

Figure 5.10

Short spacer

Long spacer

www.mymowerparts.com

For Discount Cub Cadet Parts Call 606-678-9623 or 606-561-4983

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 135 136

Pas de commentaire

Cub Cadet 435A Spécifications Page 57