Cub Cadet 435A Spécifications télécharger pdf (Page 34)

RZT-S

Brake shaft Bushings

NOTE: The brake shaft is captive on the deck lift shaft. It is serviced with the deck lift shaft. Refer to the deck

lift shaft section of Chapter 7: Decks and Lift Shaft for removal/replacement procedures.

To replace the brake shaft bushings:

1. Remove the battery.

2. Remove the deck by following the procedures

described in Chapter 7: Decks and Lift Shaft.

3. Remove the left fender by following the procedures

described in Chapter 3: Body.

4. Remove the right fender by following the proce-

dures described in Chapter 3: Body

5. Disconnect the harness from the seat switch.

6. Remove the two screws securing the seat frame to

the seat box using a 1/2” wrench. See Figure 4.11.

7. Remove both of the seat springs using a 1/2”

wrench. See Figure 4.12.

8. Remove the seat box cover using a 1/2” wrench.

Figure 4.11

Harness

Screws

Figure 4.12

Seat springs

www.mymowerparts.com

For Discount Cub Cadet Parts Call 606-678-9623 or 606-561-4983

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 135 136

Pas de commentaire

Cub Cadet 435A Spécifications Page 34