Cub Cadet 435A Spécifications télécharger pdf (Page 43)

Brakes and Drive System

11. Remove the bowtie clip that secures the bypass rod

to the by-pass arm. See Figure 4.30.

12. Slide the bypass rod off of the bypass arm.

13. Support the transmission to prevent it from falling

while the mounting bolts are removed.

14. Remove the two bolts that fasten the transmission to

the frame. See Figure 4.31.

15. Lower the transmission enough to slip the belt off of

the transmission pulley. See Figure 4.32.

16. Remove the transmission from the mower.

17. Install the transmission by following the previous

steps in reverse order.

NOTE: Before lowering the mower to the ground purge the

transmission.

18. Perform a neutral adjustment and wheel alignment by

following the steps described in 5: Steering.

19. Test drive the mower before returning it to service.

Figure 4.30

Bypass rod

Figure 4.31

Transmission bolts

Figure 4.32

Belt

Purge procedure

• Move the bypass rod to the by-pass position.

• Start the engine.

• Cycle the drive pedal from full forward to full

reverse six times.

• Move the bypass rod to the drive position.

• Cycle the drive pedal from full forward to full

reverse six times.

www.mymowerparts.com

For Discount Cub Cadet Parts Call 606-678-9623 or 606-561-4983

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 135 136

Pas de commentaire

Cub Cadet 435A Spécifications Page 43