Cub Cadet LTX 1042 KW Manuel de l'opérateur télécharger pdf (Page 24)

Cutting Deck Removal



position and engage the parking brake.

Lower the deck by moving the deck lift lever into the 2.

bottom notch on the right fender.

Locate the engine pulley under the front of your tractor. 



4.

Remove the hex screws.a.

b.

remove.

c.

engine pulley.

NOTE: If there is too much tension on the belt for it to be

easily removed from the engine pulley, carefully insert a

⁄ drive ratchet wrench (set to loosen) into the square hole

found in the deck idler bracket and pivot it toward the



WARNING! Avoid pinching injuries. Never place

your fingers on the idler spring or between the belt

and a pulley while removing the belt.

Looking at the cutting deck from the left side of the tractor, 5.

locate the deck support pin on the rear left side of the

deck.

Figure 7-1

Deck Idler

Bracket

Figure 7-2

Service

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 35 36

Pas de commentaire

Cub Cadet LTX 1042 KW Manuel de l'opérateur Page 24