Cub Cadet 440 Manuel de l'opérateur télécharger pdf (Page 5)

Warranty does not cover the following:

1. Cleaning, transporting, mailing and service call charges.

2. Normal wear items such as belts, blades, bearings, drivelines, shear pins, slip

clutches, etc.

3. Depreciation or damage caused by normal wear, accidents, improper

maintenance, improper protection or improper use.

4. The use of non original spare parts and accessories.

Your Authorized Company Dealer has genuine parts in stock. Only these approved

replacement parts should be used.

This limited warranty covers defective material and workmanship. The cost of normal

maintenance or repairs for accidents or improper use and related labor will be borne by

the owner.

1.03 - Assembly Instructions

1. Unbolt the wheel arms and discard the mounting bracket.

2. Separate the wheel arms and remove the hardware bag secured between them.

3. Important: Remove the belt shields to inspect around the belt area and

under the gearbox central plate to be sure the area is clear of packing

material such as blocks of wood, paper, etc.

4. Bolt the wheel arm assemblies to the mower deck with the flat washer and lock

nuts. There is no difference between left/right or front/rear. Be sure both

assemblies are securely mounted.

5. Assemble each wheel to the yokes with one 14x140 mm. bolt and one inner

bushing. Tighten down snugly. The wheel should turn freely but have no side to

side movement.

6. Replace the belt shields.

7. Bolt up the top hitch arms to the inside of the rear support plates on the rear of

the mower (see fig. 3).

FM48/FM60/FM72 OPERATOR’S MANUAL

GENERAL INFORMATION 5CUB CADET YANMAR

Fig. 2

1. inner spacer

2. top hitch plate

3. top hitch support

4. bolt

5. top hitch arm

6. lower hitch arm

7. front support plate

8. front roller

1 2 3 4 5 6 7 8 9 10 ... 51 52

Pas de commentaire

Cub Cadet 440 Manuel de l'opérateur Page 5