Cub Cadet 2000 Series Manuel de l'opérateur télécharger pdf (Page 23)

Section 6 — Maintenance & adjuStMentS

Lift Handle Adjustment (If so equipped)

The effort required to operate the implement lift handle can be

varied by loosening or tightening the lift assist spring adjusting

bolt on the left side of the tractor. See Figure 6-9.

Adjustment Bolt

Decrease effort

Increase effort

Figure 6-9

NOTE: The deck and/or attachment should be installed before

making adjustments to this spring.

Place the deck/attachment into the lowest position for making

adjustments. This ensures that the spring is extended the furthest.

The bolt can be accessed from the rear of the tractor, inside the left

rear wheel. Turning adjusting bolt clockwise will decrease the manual

effort required for lifting attachments; turning counterclockwise will

increase the effort needed to lift the attachment.

NOTE: 

float and/or fail out of the notches. There should always be a

downward/forward bias on the lever for proper operation.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 31 32

Pas de commentaire

Cub Cadet 2000 Series Manuel de l'opérateur Page 23