Cub Cadet Sc Series Manuel de l'opérateur télécharger pdf (Page 12)

12 Section 3 — ASSembly & Set-Up

Handle Pitch

For convenience of operation, you may adjust the pitch of the

handle as follows:

1. Remove star knobs and carriage bolts from handle. See

Figure 3-11.

Figure 3-11

2. Position the handle in one of the three positions that is

most comfortable. See Figure 3-11 inset.

3. Secure into position with star knobs and carriage bolts

removed earlier.

Drive Control

The adjustment wheel is located in the speed control housing

and is used to tighten or loosen the drive belt. You will need to

adjust the drive control if the mower does not propel itself with

the drive control engaged or if the mower’s wheels hesitate

with the drive control engaged. If either of these conditions

occur, rotate adjustment wheel clockwise to tighten cable or

counterclockwise to loosen the cable. See Figure 3-12.

Tighten

Loosen

Figure 3-12

NOTE: For ease of adjustment, the speed control should be in the

second or third speed.

Set-Up

Gas and Oil Fill-Up

Refer to the separate engine owner’s manual for additional

engine information.

1. Add oil provided before starting unit for the first time out

of the box.

2. Service the engine with gasoline as instructed in the

separate engine owner’s manual.

WARNING: Use extreme care when handling

gasoline. Gasoline is extremely flammable and the

vapors are explosive. Never fuel the machine

indoors or while the engine is hot or running.

Extinguish cigarettes, cigars, pipes and other

sources of ignition.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 27 28

Pas de commentaire

Cub Cadet Sc Series Manuel de l'opérateur Page 12