Cub Cadet Series 390 Manuel de l'opérateur télécharger pdf (Page 24)

Deck Rear Roller Adjustment

The rear rollers on the mower deck are not designed to carry

the weight of the deck. The rear rollers should be adjusted to

approximately ⁄⁄

moved to the desired cutting height.

Place the tractor on a smooth, flat surface, move the deck to the

desired cutting height, and check the height of the rear rollers. If

contacting the ground, or above ⁄

rear rollers as follows:

The deck roller assembly index bracket has five adjustment

positions holes.

While supporting the roller assembly, remove click pin and 

withdraw the clevis pin from both the left and right roller

index brackets. See Fig. 6-7.

Position the roller assembly so that the rollers are 2.

approximately ⁄⁄

Align the nearest index bracket holes with the holes in the 

deck mounting brackets. Insert the clevis pins through the

deck brackets and the index brackets and secure with the

click pins. See Fig. 6-7.

NOTE: The clevis pins should be in the corresponding holes

of both the left and right roller index brackets.

Index Bracket

Clevis Pin

Click Pin

Figure 6-7

24 se c t i O n 6 — Ma i n t e n a n c e & ad j u s t M e n t s

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 35 36

Pas de commentaire

Cub Cadet Series 390 Manuel de l'opérateur Page 24