Cub-cadet CLT-538 Manuel d'utilisateur télécharger pdf (Page 11)

Throttle Control

The throttle control lever is

located on the right side of

the tractor’s dash panel. This

lever controls the speed of

the engine and, and on

certain models when pushed

all the way forward, the

choke control also. When set

in a given position, the

throttle will maintain a

uniform engine speed.

IMPORTANT:

When operating the tractor with the cutting

deck engaged, be certain that the throttle lever is

always in the FAST (rabbit) position.

Choke Control

On some models, moving the

throttle lever all the way forward

activates the engine’s choke

control. On all other models, the

choke control can be found on

the left side of the dash panel and

is activated by pulling the knob

outward. Activating the choke

control closes the choke plate on

the carburetor and aids in starting

the engine. Refer to Starting The Engine in the

OPERATION section of this manual for detailed starting

instructions.

Speed Control Lever

The speed control lever, located on

the left side of the tractor’s dash

console, allows you to regulate the

ground speed of the lawn tractor. To

use, depress the clutch-brake pedal

and move the lever out of the parking

brake notch and forward to increase

the tractor’s ground speed. When a

desired speed has been reached,

release the lever into an appropriate

notch to maintain that speed.

To slow the tractor’s ground speed,

depress the clutch-brake pedal and

move the speed control lever

rearward and release it into a notch.

Clutch-brake Pedal

The clutch-brake pedal is located on the left side of the

lawn tractor, along the running board. Depress the

clutch-brake pedal part way down when slowing the

tractor by changing speeds (Refer to Speed Control Lever).

Depress the pedal all the way down to engage the disc

brake and bring the tractor to a complete stop.

NOTE: The pedal must be depressed to start the

engine. Refer to Safety Interlock Switches on page 13.

Parking Brake

To set the parking brake, fully depress the clutch-brake

pedal. Move the speed control lever all the way down

and into the parking brake position. Release the clutch-

brake pedal to allow the parking brake to engage.

To release the parking brake, depress the clutch-brake

pedal and move the speed control lever out of the

notches to the desired position. Release the speed

control lever and the clutch-brake pedal.

NOTE: The parking brake must be set if the operator

leaves the seat with the engine running or the engine

will automatically shut off.

IMPORTANT:

Always set the parking brake when

leaving the tractor unattended.

Shift Lever

The shift lever is located on the left side of the fender

and has three positions, FORWARD, NEUTRAL and

REVERSE. The brake pedal must be depressed and

the tractor must not be in motion when the moving shift

lever. See Figure 6.

Figure 6

IMPORTANT:

Never force the shift lever. Doing so may

result in serious damage to the tractor’s transmission.

FAST

SLOW

CHOKE

PAR K

BRAKE

ARRIERE

AVANT

Shift Knob

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 24 25

Commentaires sur ces manuels

Pas de commentaire

Cub-cadet CLT-538 Manuel d'utilisateur Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Machines spéciales Cub-cadet CLT-538